CAT PUMP MODEL 5CP2120W PUMP 4 GPM 2500 PSI 950 RPM 20mm SHAFT

CAT PUMP MODEL 5CP2120W PUMP 4 GPM 2500 PSI 950 RPM 20mm SHAFT

  • $842.68


CAT PUMP MODEL 5CP2120W PUMP 4 GPM 2500 PSI 950 RPM 20mm SHAFT

FEATURES:

Superior Design:

  • Triplex plunger design gives smoother fluid flow
  • High pressure seals are completely lubricated and cooled by the fluid being pumped
  • Inlet and discharge valve assemblies interchange for easier maintenance
  • Lubricated low pressure seal provides double protection against external leakage
  • Oil bath crankcase assures optimum lubrication
  • Close tolerance concentricity of the ceramic plunger maximizes seal life

Quality Materials:

  • All stainless steel valves are heat treated and seats are roller burnished for a positive seal and extended valve life
  • Brass, stainless steel, or nickel aluminum brass manifolds for strength and corrosion resistance
  • Special hardened, polished surface of solid ceramic plunger is abrasion resistant and results in extended seal life
  • Specially formulated CAT PUMP exclusive, HI-Pressure seals offer unmatched performance and seal life
  • Diecast aluminum crankcase provides high strength, minimum weight and precision tolerance control
  • Chrome-moly crankshaft gives unmatched strength and surface hardness
  • Oversized crankshaft bearings with greater loading capacity mean longer bearing life

Easy Maintenance:

  • Wet end is easily serviced without entering crankcase, requiring less time and effort
  • Valve assemblies are accessible without disturbing piping, for quick service
  • Preset packings mean no packing gland adjustment is necessary, reducing maintenance costs

 

 

 

SPECIFICATIONS
  • Triplex Plunger Pump
  • solid Shaft
  • Special blend W770 manifolds offer washout and freeze protection for car wash applications
  • Maximum Volume: 4.0 GPM
  • Maximum Discharge Pressure: 2500 PSI
  • Maximum Inlet Pressure: 60 PSI
  • Maximum Pump Speed: 950 RPM
  • Minimum Horsepower Requirements: 6.9 bhp (10.3 hp for gas engines)
  • Bore: .787" (20mm)
  • Stroke: 709" (18mm)
  • Crankcase Capacity: 17 oz. use CAT Pump hydraulic oil
  • Maximum Fluid Temperature: 160 Degrees F.
  • Inlet Ports: Dual 1/2" FPT
  • Discharge Ports: Dual 3/8" FPT
  • Shaft Diameter: .787" (20mm)
  • Dimensions: 10.35" x 10.0" x 5.75"
  • Weight: 19.14 lbs.

Lubrication: fill crankcase with CAT Pump hydraulic oil per pump specifications.DO NOT RUN PUMP WITHOUT OIL IN CRANKCASE. Change initial oil after a 50 hour break-in period, and every three months or 500 hour intervals thereafter.