CAT PUMP MODEL 550 5 GPM 3000 PSI BELT DRIVE SHAFT

CAT PUMP MODEL 550 5 GPM 3000 PSI BELT DRIVE SHAFT

  • $1,523.73


CAT PUMP MODEL 550 5 GPM 3000 PSI BELT DRIVE SHAFT

FEATURES:

Superior Design:

  • Triplex plunger design gives smoother fluid flow
  • High pressure seals are completely lubricated and cooled by the fluid being pumped
  • Inlet and discharge valve assemblies interchange for easier maintenance
  • Lubricated low pressure seal provides double protection against external leakage
  • Oil bath crankcase assures optimum lubrication
  • Close tolerance concentricity of the ceramic plunger maximizes seal life

Quality Materials:

  • All stainless steel valves are heat treated and seats are roller burnished for a positive seal and extended valve life
  • Brass, stainless steel, or nickel aluminum brass manifolds for strength and corrosion resistance
  • Special hardened, polished surface of solid ceramic plunger is abrasion resistant and results in extended seal life
  • Specially formulated CAT PUMP exclusive, HI-Pressure seals offer unmatched performance and seal life
  • Diecast aluminum crankcase provides high strength, minimum weight and precision tolerance control
  • Chrome-moly crankshaft gives unmatched strength and surface hardness
  • Oversized crankshaft bearings with greater loading capacity mean longer bearing life

Easy Maintenance:

  • Wet end is easily serviced without entering crankcase, requiring less time and effort
  • Valve assemblies are accessible without disturbing piping, for quick service
  • Preset packings mean no packing gland adjustment is necessary, reducing maintenance costs

 

 

 

SPECIFICATIONS:
  • Triplex Plunger Pump
  • Solid Shaft
  • Maximum Volume: 5.0 GPM
  • Maximum Discharge Pressure: 3000 PSI
  • Maximum Inlet Pressure: 60 PSI
  • Maximum Pump Speed: 1415 RPM
  • Minimum Horsepower Requirements: 8.6 bhp (12.8 hp for gas engines)
  • Bore: .630" (16mm)
  • Stroke: .945" (24mm)
  • Crankcase Capacity: 25 oz. use CAT Pump hydraulic oil
  • Maximum Fluid Temperature: 160°F
  • Inlet Ports: Dual 1/2" FPT
  • Discharge Ports: Dual 3/8" FPT
  • Shaft Diameter: .945" (24mm)
  • Dimensions: 13.93" x 9.6" x 5.9"
  • Weight: 25.5 lb.

Lubrication: fill crankcase with CAT Pump hydraulic oil per pump specifications.DONOT RUN PUMP WITHOUT OIL IN CRANKCASE. change initial oil after a 50 hour break-in period, and every three months or 500 hour intervals thereafter.