CAT PUMP 2SFX30ES3 3GPM 1500PSI 3450RPM 190°F W/UNLOADER 5/8" SHAFT
CAT PUMP MODEL 2SFX30ES3 3 GPM 1500 PSI 3450 RPM 190°F HI-TEMP W/7500XS UNLOADER FITS 5/8" SHAFT ELECTRIC MOTORPUMP FEATURES:
- UNIFLOW design provides continuous fluid flow forward through the pump, reduces cavitation risk and increases pump life
- Unique spring loaded inlet valves and the flow through ceramic plungers allow excellent suction capabilities.
- Ultimate portability, less than 11 pounds, less than 10" long.
- Regulating unloader is standard on each pump to assure system pressure control and pump protection
- Plunger Pump
- Direct Drive
- Maximum Volume: 3.0 GPM
- Maximum Discharge Pressure: 1500 PSI
- Maximum Inlet Pressure: 75 PSI
- Maximum Pump Speed: 3450 RPM
- Minimum Horsepower Requirements: 3.0 bhp
- Bore: .708" (18mm)
- Stroke: .177" (4.5mm)
- Crankcase Capacity: 11.83 oz. use CAT Pump hydraulic oil
- Maximum Fluid Temperature: 160 Degrees F.
- Inlet Port: 3/8" FPT
- Discharge Ports: Dual 3/8" FPT
- By-pass Port: 1/4" FPT
- Dimensions: 9.13" x 6.65" x 6.50"
- Weight: 11.83 lbs
Lubrication: fill crankcase with CAT Pump hydraulic oil per pump specifications.DO NOT RUN PUMP WITHOUT OIL IN CRANKCASE. Change initial oil after a 50 hour break-in period, and every three months or 500 hour intervals thereafter.